Most sex machines are difficult to explain when someone spots one beside your bed. A polar bear in pink pants? Much easier.
The built-in dildo also skips the awkward setup that comes with balancing a separate toy under a pillow. It stays securely supported, so there’s less holding, slipping, and stopping to fix the angle. Ride on top, lie back, lean forward over the plush, or stay seated and grind into it while the warmed thrusting adds penetration underneath.
Solo, that means both hands stay free for your clit, your body, or simply holding onto the bear. With a partner, hand over the remote and let them change the action while you stay in the position that feels best. When you’re finished, retract the dildo, cover the opening, and pull the pink pants back up, and your sex machine quietly turns back into a cute polar bear.
Key Features
- Secure built-in penetration gives you hands-free play without balancing a loose dildo beneath a pillow.
- Multiple riding and reclining positions let you change pressure and angle by moving your body instead of moving the toy.
- Heats to around 42°C while thrusting and vibrating for warmer, more dynamic internal stimulation.
- Fully retractable design turns an obvious adult toy back into a polar bear in pink pants when playtime is over.
- Wireless remote control makes it easy to stay in position yourself or hand the action over to a partner.
Specifications
- Plush Size: 27.6 × 10.6 in (70 × 27 cm)
- Plush Weight: 12.1 lb (5.5 kg)
- Plush Color: White
- Clothing: Pink Waterproof Pants
- Protective Cloth: Included for covering the plush area during use
- Dildo Design: Built-In and Fully Retractable
- Dildo Material: Silicone
- Support Material: ABS with Electroplated Components
- Dildo Length: 5.9 in (15 cm)
- Insertable Length: 5.9 in (15 cm)
- Dildo Diameter: 1.3 in (3.3 cm)
- Vibration Modes: 10
- Thrusting: Automatic
- Heating Temperature: Approx. 107.6°F (42°C)
- Control: Wireless Remote Control
- Remote Range: Up to 32.8 ft (10 m)
- Power: Rechargeable Battery
- Charging: Magnetic USB Charging
- Charging Time: Approx. 8 Hours
- Runtime: Approx. 2 Hours
- Noise Level: Approx. 50 dB on the Lowest Setting
- Dildo Cleaning: Rinse the silicone shaft with water as needed; do not submerge the toy or plush body.
- Plush Cleaning: Spot clean with a damp cloth, mild soap, and a small amount of water.
- Plush Water Care: Do not soak, submerge, rinse, or machine wash the plush body.
- Storage: Dildo retracts fully into the bear and can be covered with the opening cap and pink pants.
- Included: Polar Bear Plush, Pink Waterproof Pants, Protective Cloth, Wireless Remote, Magnetic USB Charging Cable, Password Lock, Dustproof Storage Bag, 3 Lubricant Sachets, 2 Condoms, User Manual
How to Use
Prepare the toy before use. Remove the pink pants and opening cap, position the protective cloth around the play area, and apply a small amount of water-based lubricant to the silicone dildo.
Turn on the main unit. Press and hold the power button on the bear for about 2 seconds to start the machine.
Adjust thrusting and vibration with the remote. Use the Thrust + / – controls to change the thrusting speed and the Vibration + / – controls to cycle through the vibration settings.
Use the heating function when desired. Press the Heat button once and allow approximately 5–10 minutes for the dildo to warm; avoid repeatedly pressing the button while it is heating. Press again to turn the heat off.
Before insertion: Check the warmed dildo with your hand first and stop heating if it feels uncomfortably hot.
Pause without changing your position. Use the Pause/Clean button to stop movement during play; this function can also hold the dildo at its extended position for easier cleaning.
Retract the dildo after use. Press the Power/Retract control to return the dildo fully inside the bear before replacing the opening cap and pink pants.
Clean after every use.
Methods for cleaning a dildo:Wipe or rinse only the exposed silicone shaft with a small amount of water and mild soap, then dry thoroughly. Make sure the dildo and surrounding area are fully dry before retracting it back into the plush.

Cleaning methods for plush body:For lubricant or body-fluid stains, gently clean the affected plush area with a damp cloth, mild soap, and a small amount of water. Do not soak, submerge, or rinse the entire plush, as water may reach the internal motor and battery.
FAQ
What should I do if the toy won’t turn on?
Fully charge the toy first, then try turning it on again. If it still does not respond after a full charge, contact us for support.
Why isn’t the toy charging or why is the indicator light not turning on?
Make sure the magnetic charging contacts are clean, dry, and properly aligned. Wipe both contact points with a clean, dry cloth and reconnect the charger. You can also try another compatible USB power source. If there is still no charging response, contact us.
Why won’t it charge after being stored for a long time?
The battery may have become deeply discharged during storage. Recharge the toy regularly even when it is not being used. For long-term storage, avoid leaving the battery completely empty for extended periods.
Can I use the toy while it is charging?
No. Disconnect the charger before turning on or using the toy, and make sure the charging contacts are completely dry before charging.
Safety & Care Notes
For personal use only. Do not share the toy with others for hygiene reasons.
Store in a cool, dry place away from direct sunlight, extreme temperatures, and corrosive chemicals.
Keep away from sharp objects that may puncture, tear, or damage the plush fabric or toy surface.
When transporting or storing the product, keep it in its original packaging or a clean storage bag to help prevent damage and contamination.
Do not disassemble, modify, or attempt to repair the internal components yourself.
This product contains a rechargeable battery. Do not burn or dispose of it with fire. Follow local regulations for battery and electronic waste disposal.